Leave A Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
It is a twin conductor heating cable designed for ice and snow melting applications.
Brand:
HuanruiPower Ouput:
28W/MMin. Installation Temperature:
5°CRated Voltage:
230VMax. withstand temperature:
105°COuter Jacket:
PVCOuter dimensions:
7.6mm ~ 8.6mmInsulation material:
XLPECable structure:
Twin conductorShield:
Aluminum-plastic tape / Tinned copperCold lead:
10MConductor:
Solid resistance alloyConnector:
Out splice/lnjection connectorOuter sheath Max temperature:
65°CCertifications:
CE,EAC
Product advantages
1.Durable and strong structure
2.High water-proofness. IP68
3.Long working life
4.25years warranty
5.Small size ,no increase in floor thickness
6.100% screened with Zero EMF
7.100% tested before delivery
8.Free of maintenance
9.Anti-UV
10. High-end automation equipment manufacturing
11.Complete product range
12.Global certification
Applications
• Keeps roof edges, gutters and downspouts ice-free.
• When designing a roof and gutter de-icing system, it is important to know that the HR-DE- FROST SN0W/2R is not intended to completely eliminate snow and ice from the roof. It is simply designed to allow for the free flow of melt water off the roof edge, down the gutter and downspouts, and finally away from the foundation of the structure. The heating cable length should be selected to allow for the cable to serpentine along the roof edge, drop down into and then down the gutter; and then finally exit through the downspout. This will allow for a complete path for the melt water to flow, which will eliminate the costly ice dams from forming on the roof edge.
Features
•Twin conductor cable
•Flexible installation
•Emit zero EMF (electromagnetic fields) Durable structure
•Single point safety connection
•25-years limited warranty
Commodity Introduction
HR-DEFROST SNOW/2R is a twin conductor heating cable with linear power of 28 W/m, and is recommended for outdoor use in ice and snow melting applications. The heating cables are equipped with a 10 m cold lead and a 100% waterproof splice. The HR-DEFROST SNOW/2R Roof & Gutter De-icing cable is designed to withstand the rigors of harsh outdoor use. This system can be installed with confidence that it will operate for years without requiring service. All components are made of the highest quality material and are tested during critical points in the manufacturing process.
l-cable underfloor heating cable is designed for new buildings applications or any other circumstances where screed is going to be laid, l-cable is a twin conductor heating cable for easy installation with zero EMF.
Learn More
Product Description：Floor Heating membrane UM505 Material：polyethylene(PE)film top; polypropylene (PP) nonwoven bottom Roll Size：1mx20m,1mx10m,1mx5m Weight：1000g/sqm Thickness：5.6mm Film thick:0.45mm Wire cable diameter：3.6-4.2mm Installation Temperature：-10℃to 40℃, but limited by tile adhesive specification Storage Temperature：Max. 45℃ Melting：160℃ Steam Resistance：160m Equivalent air layer Air gap volume：2.8 litre/m2 Filling volume of the studs：2.3 litre/m2 Distance of the studs：4.0 mm Crack bridging：0.32mm Tensile Strength：73N/cm Waterpoof：yes Packing：wrapped in plastic film Color：Red, Orange, Yellow, Blue etc Estimation of power may achieve from different cable distribution: @64mm spacing 214W/m2 @96mm spacing 142W/m2 @128mm spacing 100W/m2 CAD Drawing:
Learn More
The HRTCPR is an electrically heated cable designed to prevent snow and ice accumulation around the home or facility, such as driveway, walkways and stairs and so on.
Learn More
Common voltage: 220V/380V Product classification: Electric heat tracing accessories The explosion-proof distribution box (cabinet) for electric heat tracing is made of aluminum alloy, electrostatic spray plastic, and complies with the explosion-proof regulations of GB3836.2-2000. It is used for the distribution of electric heat tracing products in Class II, Zone 1, and Zone 2 explosion-proof areas. It has overload, single phase, and three-phase two categories, and outputs 1-12 circuits. There are two types of temperature control: fractional display temperature controller and BJW type temperature controller. Anhui huanrui electrical conduit with thermal control and monitoring system will be widely used in the fire pipes, pumps, valves, tank and tank container with heat, anti freezing and anti coagulation, and other heat tracing system. In addition, traffic, petroleum, chemical, electric power, medicine, machinery, food, shipping and other fields, can play a huge role. The real intelligent control can be realized with the current electric heat tracing system.
Learn More
HPC self-regulating heating cables is designed for freeze protection or process temperature maintenance of pipes and vessels with very high maintain temperatures (210°C). Maximum exposure temperature is 260°C. which provides the most versatility in heat trace designs and installation.
Learn More
Maintenance temperature: 0-200 ℃ Temperature resistance: 600 ℃ Insulation material: customizable
Learn More
HRDTFP underfloor heating mats are designed for wooden floor; laminated floor and under carpet heating systems.
Learn More
Electric Underfloor Heating Cable HRWT3.2. With twisted structure, the cable is flexible and easy to install.
Learn More
