Leave A Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
FSR heating cable with a prefabricated plug for easier connection to AC power.
Brand:
HuanruiPower Ouput:
17,23(W/M)Max. Maintain Temperature:
65℃Max. Exposure Temperature:
85℃Min. Installation Temperature:
-60℃Rated Voltage:
110V-120V/220V-240VMax. Current Length/16A Breaker:
80m Exterior FittingBus Wire Gauge:
1.0mm²Outer Jacket:
Fluoropolymer/ThermoplasticCertifications:
CE,EAC,IEx e IIC T6 Gb X,Ex tb IIIC T85°C Db XTypical applications include roof & gutters, drains, water pipes, large diameter tanks, valves, flanges those will suffer from the damages caused by high heat loss.
FSR kit easily prevents damage and leakage caused by frost and eliminates the inconvenience from iced water; as well as prevents the ice and snow from forming on roof and in gutter.
Interior or Exterior
The heating cable kit with fluoropolymer or thermoplastic outer jacket is non-toxic and suitable for drinking water pipes. The kit is energy saving and environmentally-friendly, it is also UV-proof.
For exterior laying, use additional kits. For interior laying, maximum applicable cable length is 60m.
The unique advantages of Huanrui self-regulating heating cable:
1. Improve the temperature resistance level: The temperature resistance level of the PTC semiconductor irradiation heating matrix can reach 100-110°C as needed to improve operational safety.
2. Reduce the starting current: Huanrui adopts double-layer co-extrusion technology, the starting current in the normal power range reaches <0.3A/M, and the ratio of starting current to steady-state current is less than 3 times.
3. Advanced insulation material: The insulation material is 100% matched with the PTC semiconductor irradiation heating matrix. In addition, it has excellent weather resistance, high temperature resistance, and insulation resistance of >2000MΩ, making it safer and more reliable.
4. New process: Huanrui adopts multi-layer co-extrusion technology. The insulation layer and PTC semiconductor irradiation heating matrix are extruded at the same time and completed in one go. The heating matrix and insulation are seamlessly integrated and cannot be peeled off, completely eliminating moisture and water when immersed, impurities cannot harm the core tape. Improve product service life.
Never overheat or burnout when overlapped. Cut to any length. Easy to install.
FSR self-regulating heating cable is constructed of a semi-conductive heater matrix extruded between parallel bus wires, a self-regulating cable adjusts its output to independently respond to ambient temperatures all along its length.
Learn More
RSR self-regulating heating cables provide the most versatility in heat trace designs and applications. This product has been used for over 1000,000 meters in our company’s key partners, PetroChina, CNOOC,Sinopec,China Aerospace,Wanhua Chemical and other global Fortune 500 companies.
Learn More
HRDTFP underfloor heating mats are designed for wooden floor; laminated floor and under carpet heating systems.
Learn More
HWSR self-regulating heating cable is highly efficient both to prevent freezing and to maintain temperature for hot water supply pipes.
Learn More
Product Description：Floor Heating membrane UM505 Material：polyethylene(PE)film top; polypropylene (PP) nonwoven bottom Roll Size：1mx20m,1mx10m,1mx5m Weight：1000g/sqm Thickness：5.6mm Film thick:0.45mm Wire cable diameter：3.6-4.2mm Installation Temperature：-10℃to 40℃, but limited by tile adhesive specification Storage Temperature：Max. 45℃ Melting：160℃ Steam Resistance：160m Equivalent air layer Air gap volume：2.8 litre/m2 Filling volume of the studs：2.3 litre/m2 Distance of the studs：4.0 mm Crack bridging：0.32mm Tensile Strength：73N/cm Waterpoof：yes Packing：wrapped in plastic film Color：Red, Orange, Yellow, Blue etc Estimation of power may achieve from different cable distribution: @64mm spacing 214W/m2 @96mm spacing 142W/m2 @128mm spacing 100W/m2 CAD Drawing:
Learn More
Maintain temperature: 0~600℃ Temperature resistance: 600~800℃ Insulating material: magnesium oxide MI cables are manufactured using a special production process using single or multiple alloy electric heating wires as the heating source, high-purity, high-temperature, fused crystallized magnesium oxide as the heat-conducting insulator, and seamless continuous stainless steel or copper tubes as the sheath. In places with strong corrosive effects, PE or low-smoke halogen-free jackets can be added.
Learn More
The snow melting mat starts to work quickly, it is used for warming in multiple areas; it is also suitable for environments of strict requirements. Pre-assembled with a plug ready for use, easy to connect and flexible to move.
Learn More
