Leave A Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
FSR kit easily prevents damage and leakage caused by frost and eliminates the inconvenience from iced water; as well as prevents the ice and snow from forming on roof and in gutter.
FSR heating cable with a prefabricated plug for easier connection to AC power.
Typical applications include roof & gutters, drains, water pipes, large diameter tanks, valves, flanges those will suffer from the damages caused by high heat loss.
Brand:
HuanruiPower Ouput:
17,23(W/M)Max. Maintain Temperature:
65℃Max. Exposure Temperature:
85℃Min. Installation Temperature:
-60℃Rated Voltage:
110V-120V/220V-240VMax. Current Length/16A Breaker:
80m Exterior FittingBus Wire Gauge:
1.0mm²Outer Jacket:
Fluoropolymer/ThermoplasticCertifications:
CE,EAC,IEx e IIC T6 Gb X,Ex tb IIIC T85°C Db XInterior or Exterior
The heating cable kit with fluoropolymer or thermoplastic outer jacket is non-toxic and suitable for drinking water pipes. The kit is energy saving and environmentally-friendly, it is also UV-proof.
For exterior laying, use additional kits. For interior laying, maximum applicable cable length is 60m.
The unique advantages of Huanrui self-regulating heating cable:
1. Improve the temperature resistance level: The temperature resistance level of the PTC semiconductor irradiation heating matrix can reach 100-110°C as needed to improve operational safety.
2. Reduce the starting current: Huanrui adopts double-layer co-extrusion technology, the starting current in the normal power range reaches <0.3A/M, and the ratio of starting current to steady-state current is less than 3 times.
3. Advanced insulation material: The insulation material is 100% matched with the PTC semiconductor irradiation heating matrix. In addition, it has excellent weather resistance, high temperature resistance, and insulation resistance of >2000MΩ, making it safer and more reliable.
4. New process: Huanrui adopts multi-layer co-extrusion technology. The insulation layer and PTC semiconductor irradiation heating matrix are extruded at the same time and completed in one go. The heating matrix and insulation are seamlessly integrated and cannot be peeled off, completely eliminating moisture and water when immersed, impurities cannot harm the core tape. Improve product service life.
Never overheat or burnout when overlapped. Cut to any length. Easy to install.
FSR self-regulating heating cable is constructed of a semi-conductive heater matrix extruded between parallel bus wires, a self-regulating cable adjusts its output to independently respond to ambient temperatures all along its length.
Learn More
HRDVCM underfloor heating mat uses a twin conductor heating cable for easy installation, and mat is designed for installation into thin adhesive beds, leveling compounds or thin screed beds beneath tiled and wooden floor.
Learn More
S-mat underfloor heating mat is designed to be as thin as possible and 100% screened. The cable is designed for installation into thin adhesive beds, leveling compounds or thin screed beds beneath tiled and wooden floor.
Learn More
Common voltage: 220V/380V Product classification: Electric heat tracing accessories Product certification: 3C certification
Learn More
The HM-cable is an electric heating cable designed to prevent snow and ice accumulation around the home or facility, such as driveway, walkway, stairs and so on.
Learn More
The snow melting mat starts to work quickly, it is used for warming in multiple areas; it is also suitable for environments of strict requirements. Pre-assembled with a plug ready for use, easy to connect and flexible to move.
Learn More
l-cable underfloor heating cable is designed for new buildings applications or any other circumstances where screed is going to be laid, l-cable is a twin conductor heating cable for easy installation with zero EMF.
Learn More
The steel strip and fixer of a stainless steel belt and a regulating screw, which is used for fixing the explosion proof power supply connection box and other accessories in the pipeline. It is for underfloor heating cable, make installation easier. Application The steel strip and fixer of a stainless steel belt and a regulating screw, which is used for fixing the explosion proof power supply connection box and other accessories in the pipeline. The steel strip can be cut by 1.1 times the actual fixed length according to the diameter of the pipe. The front and back ends of the adjusting screw are respectively fixed in the small holes of the two ends, and the screw can be tightened. Self-regulating Heating Cable Steel Strapping of a stainless steel belt and a regulating screw, which is used for fixing the explosion proof power supply connection box and other accessories in the pipeline. The steel strip can be cut by 1.1 times the actual fixed length according to the diameter of the pipe. The front and back ends of the adjusting screw are respectively fixed in the small holes of the two ends, and the screw can be tightened. We have two type of cable strapping, one for our T-cable(3.6mm), another for our I-cable(5.0mm)
Learn More
