Contant Wattage Heating Cables

HRTP Mat   The snow melting mat starts to work quickly, it is used for warming in multiple areas; it is also suitable for environments of strict requirements. Pre-assembled with a plug ready for use,easy to connect and flexible to move. The most common applications for snow melting heating mats are for snow thawing of floors, sand,water,pipes, sewage pipes, feeds and silos, or insulation and anti-freezing in the workplace of electrical and tele-communications cables, machinery and brickwork. The mat is heated on one side and the other side is insulated to prevent heat from being conducted, further improving efficiency. Strong thawing ability: normally on ground it can thaw the snow of height of 30 cm in 24 hours or 60 cm in 24 hours on the sand.    

BHS-cable Concrete curing heating cable    

Heating Mat    In winter; when the accumulated snow on walkways, parking garage, loading ramps, stairways and other areas, it will bring problem to people's life. Electric snow melting systems can keep walkways, parking garage, loading ramps, stairways and other areas free of snow and ice to help prevent slip hazards. Electric snow melting systems provide surface snow melting and anti-icing for concrete surfaces and pavers.   Installation of the HM-mat snow melting system provides a permanent solution to the problems caused by cold weather when snow and ice accumulation. It can be used both outdoor and indoor environment. • Ideal for driveways, parking lots, sidewalks, stairs, ramps, bridges and many other applications. • For used under concrete, asphalt, paver or stone and ceramic or stone tile. • Roof & gutter de-icing. • Subfloor energy storage heating.         

HRSHTV   HRSHTV is a fully screened twin conductor cable with a tough black UV protected PVC outer sheath, to install in outdoor applications such as roof and gutter or ground applications. Its round profile makes it simple to install in outdoor applications such as roof and gutter or ground applications.     

HRHC(EU/North America)   HRHC roof and gutter de-icing cables help end costly ice damage by preventing ice dam formation and promoting the free flow of water through gutters and downspouts to ground level. • With temperature and humidity controller, intelligently controlled, energy-saving. • Pre-assembled and easy to install and use. • Pre-assembled with a power plug ready for use.             

HM-Cable   The HM-cable is an electrically heated cable designed to prevent snow and ice accumulation around the home or facility, such as driveway, walkways and stairs and so on. In winter; when the accumulated snow on walkways, parking garage, loading ramps, stairways and other areas, it will bring problem to people's life. Electric snow melting systems can keep walkways, parking garage, loading ramps, stairways and other areas free of snow and ice to help prevent slip hazards. Electric snow melting systems provide surface snow melting and anti-icing for concrete surfaces and pavers.        

PHC (EU/North America)   Interior & Exterior The heating cable kit with fluoropolymer or thermoplastic outer jacket is non-toxic and suitable for drinking water pipes. The kit is energy saving and environmentally-friendly, it is also UV-proof. For exterior laying, use additional kits. For interior laying, maximum applicable cable length is 100m.   • Pre-assembled with thermostat, intelligently controlled, energy-saving, users do not need to worry about the operation. • Used to prevent water pipes from freezing, available in a minimum room temperature of -40°C. • Pre-assembled product, easy to install and use. • Pre-assembled with power plug, ready for use. • Can be used for plastic as well as for iron pipes.          

RDP   Parallel constant wattage heating cable can be used for pipe and equipment freeze protection and process temperature maintenance requiring high power output or high temperature exposure. This type provides an economical alternative to self-regulating heating cable but requires more skill for installation and more advanced control and monitor systems. Constant wattage heating cables can provide process temperature maintenance up to 150°C and can withstand exposure temperatures up to 205°C with power on.         

RDC   RDC series connection constant wattage heating cable use the core conductor as the heating element, when the core conductor connect to power supply, the core conductor will send out joule heat, same as they are of the entire cable length, the heating value of each unit is the same.  This will not result in a situation that the power in the terminal end is lower than it is in the beginning end as the heating cable length increases. So this type is suitable for long pipe-line and large diameter pipeline's heat tracing and heat preservation. Power supplied by one power point.