Item NO.:
HRBHSLead Time:
20 days after received paymentProduct Orgin:
ChinaBrand:
HuanruiShipping Port:
Any port in ChinaPayment:
FOB CFR CIF DDU DDP EXWColor:
OEMI-cable is a heating cable designed for new buildings applications or any other circumstances where screed is going to be laid.This system is usually installed on top of a layer of insulation beneath a 50-70 mm screed and the output can be varied when being installed to accommodate your specific circumstances.If an output of 160 W/m² is choose1
The snow melting mat starts to work quickly, it is used for warming in multiple areas; it is also suitable for environments of strict requirements. Pre-assembled with a plug ready for use, easy to connect and flexible to move.
Weekly Programming Thermostat with LCD Screen Weekly circulation, it is possible to set 6 periods called events each day with different temperatures, also you can select "manual mode" or "temporary control mode" according to your individual requirements. The thermostat is recommended for the control of electric heating devices or on/off valve actua1
T-mat underfloor heating mat uses a twin conductor heating cable for easy installation, and this mat is with zero EMF, designed for installation into thin adhesive beds, leveling compounds or thin screed beds beneath tiled and wooden floor.
Pre-assembled Self-Regulating Heating Cable Kits FSR Kits is mostly used for outer side pipe frost protect, snow melting, roof and gutter de-icing.The kit has per-assembled plug, very easy to install, save energy.
Middle Temperature Self-regulating Heating Cable HWSR is design for hot water temperature maintain, when hot water taps are infrequently used, the water stay in the distribution pipework cools and is usually run to waste before hot water from the storage cylinder arrives at the tap. We have two types of HWSR cable, one can maintain the temperature 1
Product Name:
HRBHS concrete curing heating cable
Electrical heating cables may be used for drying and hardening of concrete in new buildings. Hardening usually takes 7 – 10 days, depending on climate and temperature. By installing heating cables this time can be reduced.
HRBHS is a underfloor heating cable for curing and drying concrete, as well as heating. The system speeds up concrete curing and enables faster formwork dismantling. The heating cable, which is fixed to the reinforcement, can be reconnected at a later stage for effective drying or heating.With HRBS concrete curing cables, you have a smart and energy-efficient way of curing quickly and being able to dismantle formwork quickly even in temperatures below zero.
Features and applications:
• 5.5mm diameter.
• Twin-conductor, with plug, ready for use.
• Zero EMF.
• Can be used in humid places.
• Multi-layer XLPE material, the mechanical strength of the product can reach class. M2, and will not be deformed in short-term exposure up to 150°C.
• This product is mainly used for concrete curing.
Data & certifications:
Applicable areas Europe, Domestic
Application Concrete curing
Rated Voltage 220-230V
Power output 36.7W/m-40W/m
Minimum installation temperature 5°C
Minimum bending radius 6D
Certifications CE
Model |
Rated Voltage/V |
Length/m |
Power Output/W |
Resistance/Ω |
HRBHS 3.3m |
230 |
3.3 |
130 |
406.9 |
HRBHS 10m |
230 |
10.0 |
380 |
139.2 |
HRBHS 20m |
230 |
20.0 |
735 |
72.0 |
HRBHS 35m |
230 |
35.0 |
1400 |
37.8 |
HRBHS 55m |
230 |
55.0 |
2200 |
24.0 |
HRBHS 85m |
230 |
85.0 |
3500 |
15.1 |