Industrial Heating Cable SSR
Home / Industrial Heat Tracing / Industrial Self-Regulating Heating Cable / Industrial Heating Cable SSR /

110℃/135℃ Bestselling 120 240v Self Regulating Heating Tapes Electric Heat Cable

self regulating heating cable

110℃/135℃ Bestselling 120 240v Self Regulating Heating Tapes Electric Heat Cable

SSR self-regulating heating cables provide the most versatility in heat trace designs and applications.

This product has been used for over 500,000 meters in our company’s key partners, PetroChina, CNOOC,Sinopec,China Aerospace,Wanhua Chemical and other global Fortune 500 companies.

  • Brand:

    Huanrui
  • Power Ouput:

    35,45,60(W/M)
  • Max. Maintain Temperature:

    110℃
  • Max. Exposure Temperature:

    135℃
  • Min. Installation Temperature:

    -60℃
  • Rated Voltage:

    110V-120V/220V-240V
  • Max. Resistance of Braid:

    ≤18.2Ω/Km
  • Bus Wire Gauge:

    1.37mm²
  • Certifications:

    CE,EAC,EACEX,ATEX,IEx e IIC T4 Gb X,Ex tb IIIC T135°C Db X

  Constructed of a semi-conductive heater matrix extruded between parallel bus wires, a self-regulating cable adjusts its output to independently respond to ambient temperatures all along its length. As temperature increases, the heater's resistance increases, which lowers the output wattage.

  Conversely, as the temperature decreases, the resistance decreases and the cable produces more heat. So thermostat is not necessary in some applications. It will never overheat or burnout even when overlapped. The cable can also be cut to any length. As the result, we got an energy efficient heating cable.


The unique advantages of Huanrui self-regulating heating cable: 

1. High temperature-resistant PTC matrix material: The heating temperature of the PTC semiconductor irradiation heating matrix can be stably maintained at 110°C, which has higher thermal stability.

2. Reduce the starting current: Huanrui adopts double-layer co-extrusion technology, and the starting current in the normal power range reaches 0.5-0.7A/M, far exceeding the data of domestic peers.

3. Unique materials: Insulating materials are 100% matched with PTC semiconductor radiant heating matrix. The material has excellent weather resistance, high temperature resistance, and insulation resistance of >2000MΩ, making it safer and more reliable. Longer service life.

Never overheat or burnout when overlapped. Cut to any length. Easy to install.








SSR Series

SSR-P: Tinned copper braid provides additional mechanical and ground protection. 

SSR-PB: Flame retardant thermoplastic outer jacket protects against certain inorganic chemical solutions, it also protects against abrasion and impact damage.

SSR-PF: Fluoropolymer outer jacket is used for exposure to organic or corrosive working conditions or vapor may exist.


Application

SSR is ideally used for process temperature maintenance and frost protection of large diameter pipelines, tanks, valves, flanges, and other industrial applications of high heat loss issues. It is suitable for non-hazardous area, and cable with fluoropolymer outer jacket can also be used in hazardous area and corrosive area.


Leave A Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

New Products

Related Products
Wifi Thermostat

 Heating Thermostat User Manual Many thanks for your selection of our products and services, and also for your trust and support to us. Features Appearance (1) Standard total Size is 86*86mm (2) Touch buttons to make simple operation (3) The visible thickness above the wall is only 15mm86mm (4) hidden box and 60mm European box (5) Display size : 64*64mm (6) Color:white,black Functions (A) Including built-in sensor and external sensor (B) 0.5°C accuracy keeps temperature within the level you set. (C) Children lock to prevent misoperation by children (D) Data memory when power is off. (E) Holiday mode make you enjoy more comfortable temperature in holiday (F) The temperature of external sensor can be checked Product Specifications ☆ Power: 90-240Vac 50/60HZ ☆ Range of temperature display: 0~40°C ☆ Max. control accuracy: 0.5°C ☆ Probe sensor: NTC(10k)1% ☆ Contact capacity: 3A/250V(WW);16A/250V(WE) ☆ Output: Switch relay ☆ Limit temperature range: 0~70°C ☆ Insulating condition: Normal environment ☆ Default setting temperature range:5~35°C ☆ Size(mm):86*86*27 Before wiring and installation 1.Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition. 2.Check the ratings given in the instructions and on the product to make sure the produce is suitable for your application. 3.Installer must be a trained experienced service technician. 4.After installation is complete.check out produce operation as provided in these instructions CAUTION Electrical shock or equipment Damage Hazard. or short equipment circuitry. Disconnect power supply before installation                                    Sensor fault display:please choose correct working way of built-in and external sensor, if choose wrongly or sensor fault (breakdown), “E1” or “E2” will be displayed on the screen. Thermostat will stop heating until the fault is eliminated Warranty: We offer the warranty of 18 months, from the sales day. The products of our company can have lifetime warranty ,if it is not the quality problems, or beyond the warranty period, we will charge for the after-sale service

Learn More
heat cable

FSR kit easily prevents damage and leakage caused by frost and eliminates the inconvenience from iced water; as well as prevents the ice and snow from forming on roof and in gutter. FSR heating cable with a prefabricated plug for easier connection to AC power. Typical applications include roof & gutters, drains, water pipes, large diameter tanks, valves, flanges those will suffer from the damages caused by high heat loss.

Learn More
China Power Junction Box BHD-F Manufacturer

Shell material: engineering plastic Current ≤40A. Thread specification:NPT; M40*1.5, M32*1.5, M25*1.5 M20*1.5, M12*1.5 Shell size (mm): 120*120*100; 130*130*120; 220*130*120 Scope of use: Self-limiting temperature heating tape, constant power heating tape, connection components of series constant power power cords and heating tapes.

Learn More
heat-resistant pressure-sensitive tape

Common voltage: 220V/380V Product classification: Electric heat tracing accessories Electric heat tracing heat-resistant pressure sensitive tape, also known as fixed tape, is a type of adhesive tape formed by coating a special adhesive on the basis of glass fiber tape. Aluminum tape is coated with a special adhesive layer on the aluminum foil tape. It is used for heating the temperature control device and the temperature sensing package of the temperature controller is convenient to install, and the main function is to fix the electric heating belt and increase the radiating surface of the electric heating belt.

Learn More
Constant Wattage Heating Cable

Electric Underfloor Heating Cable HRVP4.5. With twisted structure, the cable is flexible and easy to install.

Learn More
Constant Wattage Heating Cable

  TXLP/2R Twin conductor underfloor heating cable widely used for thick concrete heating, soil heating and road snow melting, etc.

Learn More
self regulating heating cable

RSR self-regulating heating cables provide the most versatility in heat trace designs and applications.

Learn More
Top
Leave A Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Home

Products

skype

whatsapp