bannerny

In Screed Underfloor Heating Cable I-cable

I-cable is a heating cable designed for new buildings applications or any other circumstances where screed is going to be laid.This system is usually installed on top of a layer of insulation beneath a 50-70 mm screed and the output can be varied when being installed to accommodate your specific circumstances.If an output of 160 W/m² is choosed, then any floor covering can be laid on top of the screed, making this a suitable system to install when final floor coverings have not been applied.

Loose Wire Heating Cable System
LOADING IMAGES
  • Item NO.:

    I-cable
  • Lead Time:

    20 days after received payment
  • Product Orgin:

    China
  • Brand:

    Huanrui
  • Shipping Port:

    Any port in China
  • Payment:

    FOB CFR CIF DDU DDP EXW
  • Color:

    OEM color
contact us now
Related products
  • concrete curing HRBHS concrete curing heating cable

    HRBHS is a heating cable for curing and drying concrete, as well as heating. 

  • Inner Pipe Frost Protect Pre-assembled Self-regulating Heating Cable Kits MSR Kits

    Pre-assembled heating cable kits MSR Kits is mostly used for inner pipe or outer side pipe frost protect. Especially our MSR-PF have Teflon outer jacket, the Teflon outer jacket have NSF certificate, it can be used for drinking water. It has EU plug or any other plug you need. The cold lead length can be choose.

  • Self-regulating Heating Cable Accessories Power Connection Tee Kits

    Anhui Huanrui Two way and three way Ex Tee splice is used for self-regulating heating cable tee connection,both two way and three ways.With EX certificate can use in hazardous area.

  • Comfort Floor Heating Cable Electric Underfloor Heating Cable T-Cable

    Electrical underfloor heating cable is designed to be as thin as possible, only 3.6mm, it has two kinds of output power,12w/m and 18w/m,ensures the economic and energy saving and decreases the floor level to the maximum extend.

  • Self-regulating Heating Cable Low Temperature Self-regulating Heating Cable LSR

    Self-regulating heating cable can be used for a lot applications like pipe and vessels freeze protection,pipe and tank temperature maintenance,snow melting for roads and walkways,roof and gutter de-icing

  • Under Carpet Heating Mat Ultra Thin 150w/sqm Laminate Heating Mat F-mat

    Electric underfloor heating system for laminate, carpet, vinyl, engineered wood and other floating floor finishes.

  • Features & Benefits

Product Name: In Screed Underfloor Heating Cable -- I-cable


Commodity Introduction: 

I-cable is a twin conductor heating cable for ease of installation and has very low EMF. I-cable is a cable for in screed heating in new buildings and suitable for use for all kind of rooms and all kinds of coverings.



Type

voltage

Length/m

Output/W

Resistance/Ω

I-cable20-200

230

10

200

264.5

I-cable20-300

230

15

300

176.3

I-cable20-400

230

20

400

132.3

I-cable20-500

230

25

500

105.8

I-cable20-600

230

30

600

88.2

I-cable20-700

230

35

700

75.6

I-cable20-850

230

42.5

850

62.2

I-cable20-1000

230

50

1000

52.9

I-cable20-1200

230

60

1200

44.1

I-cable20-1400

230

70

1400

37.8

I-cable20-1600

230

80

1600

33.1

I-cable20-1800

230

90

1800

29.4

I-cable20-2000

230

100

2000

26.5

I-cable20-2200

230

110

2200

24

I-cable20-2400

230

120

2400

22

I-cable20-2600

230

130

2600

20.3

I-cable20-2800

230

140

2800

18.9

I-cable20-3100

230

155

3100

17.1



Technical Data: 

Cable construction: Twin conductor
Outer Insulation: PVC/Fluoropolymer
Conductor Insulation: Fluoropolymer
Shield: Al foil and Cu wire
Protective jacket: PVC
Connector: Out splice
Outside diameter: 5.0-5.8 mm
Rated voltage: 110-120 V, 220-240 V
Power output: 20 w/m
Resistance tolerance: +10/-5 %


Features:

20 w/m

Twin conductor heating cable

Very low EMF

Only one cold tail for ease of installation

Diameter 5.0-5.8mm

100% screened

 

Applications:

I-cable is a heating cable designed for new buildings applications or any other circumstances where screed is going to be laid.

This system is usually installed on top of a layer of insulation beneath a 50-70mm screed and the output can be varied when being installed to accommodate your specific circumstances.

If an output of 160W/m2 is chosen, then any floor covering can be laid on top of the screed, making this a suitable system to install when final floor coverings have not been applied.


MOQ: 50 pcs


Certificate:

Our I-cable have already got CE TUV EAC certificate, and can apply OEM service. More Self-Regulating Heating Cable Kits may meet your requirements.


Feedback

contact us now

online service

+86-551-67709531

+86 136 3569 0401

leave a message

Anhui Huanrui

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!